About the structure of the batching tank, just look at these to know

Category:

Blog

The batching tank, also known as the mixing tank or batching barrel, is a three-layer structure with an upper opening and a lower sloping bottom. It has the functions of automatic temperature control, heat preservation and stirring . It has the advantages of fast heat transfer, adaptability to large temperature differences and easy cleaning.

It is widely used in food (dairy), pharmaceutical, daily chemical, beverage, oil, chemical, pigment and other industries as intermediate buffer, liquid storage, stirring, mixing equipment (when the material can be evenly mixed without heating, this equipment is the most economical and practical), heating, mixing or sterilization.

The batching tank has the functions of automatic temperature control, heat preservation and stirring, and is widely used in food (dairy), pharmaceuticals, daily chemicals, beverages, oils, chemicals, pigments and other industries as intermediate buffering, liquid storage, stirring and blending equipment.

It is especially suitable for small and pilot use in units and scientific research institutions without steam heat source. It can also adopt fully enclosed structure and heat preservation structure according to process requirements.

The liquid preparation tank is heated by steam in the jacket, and the heat is transferred to the material through the inner wall of the tank to maintain the required temperature. At the same time, the magnetic stirrer stirs and rotates the material to continuously roll the material so that the liquid medicine can be mixed evenly.

It has the characteristics of energy saving, corrosion resistance, strong production capacity, easy cleaning and simple structure. It is an indispensable equipment for manufacturers of dairy products, beverages and pharmaceuticals.

Let's take a look at the structure of the batching tank :

The equipment consists of a tank body, a jacket, an inner tank, a head, a magnetic stirring device and a common system pipeline. The main body is made of imported stainless steel, in accordance with the technical conditions of GB741-80. The tank body is polished inside and outside. There is a stirring paddle in the tank to stir during operation. There is a thermometer on the upper cover to display the temperature inside the tank.

There is a cycloidal pin-driven planetary reducer on the top to drive the stirring paddle . It can be disassembled and cleaned, and has an openable tank cover for cleaning. There are two additional feed ports that can be connected to pipelines for easy connection of various ingredients. There is a discharge port at the bottom, and a plug valve is installed. After stirring evenly, rotate the plug valve handle 90° to discharge the material, and close it after discharging to achieve the purpose of even stirring. It can be equipped with a liquid level meter or weighing equipment to measure the volume or weight of the material in the tank.

The detailed operation process of the fermentation tank is here

Brief Introduction of Lianyungang Bailun Bioreactor Technology Co., Ltd.